Description of Industrial Mixer for Chemical Product:
The three dimensional movement mixer is a new type of high-efficiency powder mixing equipment, which can be applied to the mixing of various dry powder materials. Because it adopts a new kinematics principle, the mixing motion becomes three main motions: translation, rotation and flipping. Superposition, so it has extremely high efficiency.
The movement mode of this Powder Mixing Machine determines that it continuously moves materials in a pulsating manner during the mixing process, and the diffusion and convection between materials are very sufficient. Even if the specific gravity is poor, the proportioning Materials with large particle size difference can also be mixed evenly in a very short time, and the influence of centrifugal force can be eliminated at the same time. This Powder Mixer Machine can be widely used in powder metallurgy, abrasives, fine chemicals, medicine, food, dyes, explosives and other industries.
Principle:
When it works, the Powder Blender Machine is provided with three-dimensional movement, and carries out revolution and rotation. The Mixing Machine has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.
Features:
●The Powder Blending Machine is provided with three-dimensional movement so that the materials complete the process of mutual mixing from the agglomeration status to dispersion status under the actions of flowing, shearing, translational movement and dispersion, even mixing of materials is ensured and the evenness reaches 99.9%. In ordinary mixers, the materials only make simple dispersion and agglomeration movement in the vessel, which is featured by low efficiency and bad mixing quality.
●With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)
●The blending machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.
●The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.
●For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.
●Stepless speed adjustment can be realized to facilitate material loading and unloading.
●It is featured by long service life and low noise.
●Vacuum feeding and lifting machine feeding are available.
Drawing:
Contact Now
