Food Powder Mixer Machine

Description of Food Powder Mixing Machine: The three dimensional movement mixer includes a main body of the three-dimensional motion mixer, the bottom of the three-dimensional motion mixer body is fixedly connected with a U-shaped base, the bottom of the U-shaped base is bonded and fixed with anti-skid rubber pads, and both sides of the bottom of the U-shaped base are provided with storage Two U-shaped rods are welded on the inner walls of both sides of the storage tank, and the sliding sleeves on the four U-shaped rods located in the same storage tank are provided with the same steel plate, and the bottom of the steel plate is rotated and installed with two universal wheels. 

The utility model is reasonable in design, easy to use, convenient for synchronous storage of the four universal wheels, and prevents the overall displacement of the universal wheels and the ground due to the small contact area when they are accidentally touched and hurts personnel or other equipment, and makes the universal wheels The wheel is no longer in a long-term support state, which reduces the risk of damage to the universal wheel and improves the service life, which is beneficial to use.

Principle:

When it works, the mixer is provided with three-dimensional movement, and carries out revolution and rotation. The blending machine has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.

Features:

●The Mixing Machine is provided with three-dimensional movement so that the materials complete the process of mutual mixing from the agglomeration status to dispersion status under the actions of flowing, shearing, translational movement and dispersion, even mixing of materials is ensured and the evenness reaches 99.9%. In ordinary mixers, the materials only make simple dispersion and agglomeration movement in the vessel, which is featured by low efficiency and bad mixing quality.

●With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)

●The Powder Mixer Machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.

●The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.

●For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.

●Stepless speed adjustment can be realized to facilitate material loading and unloading.

●It is featured by long service life and low noise.

●Vacuum feeding and lifting machine feeding are available.

Drawing: