Mixer for Chemical Pharmaceutical Food Product

Description of Mixer for Chemical Product:

The three dimensional movement mixer includes a support plate, a three-dimensional motion mixer body is arranged above the support plate, a push rod motor is fixedly installed on the top of the support plate, the output shaft of the push rod motor is fixedly connected to the bottom of the three-dimensional motion mixer body, and the support The top of the plate is provided with a first through hole, and a square block is slidably installed in the first through hole, the top and bottom of the square block both extend to the outside of the first through hole, and the top of the square block is provided with four first grooves. A first round rod is slidably installed in a groove. The utility model has simple structure and strong practicability, and can easily move the body of the three-dimensional motion mixer according to needs. After moving, it is easy to fix at the same time, and the operation is simple and convenient.

Principle:

When it works, the mixer is provided with three-dimensional movement, and carries out revolution and rotation. The mixer has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.

Features:

●The Mixing Machine is provided with three-dimensional movement so that the materials complete the process of mutual mixing from the agglomeration status to dispersion status under the actions of flowing, shearing, translational movement and dispersion, even mixing of materials is ensured and the evenness reaches 99.9%. In ordinary mixers, the materials only make simple dispersion and agglomeration movement in the vessel, which is featured by low efficiency and bad mixing quality.

●With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)

●The Powder Mixer Machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.

●The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.

●For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.

●Stepless speed adjustment can be realized to facilitate material loading and unloading.

●It is featured by long service life and low noise.

●Vacuum feeding and lifting machine feeding are available.

Drawing: