Blender for Chemical Pharmaceutical Food Product

Descricption of Blender for Chemical Product:

The three dimensional movement blender includes a frame, an inversion mixing drum and an inversion driving frame, the inversion mixing drum is installed on the inversion driving frame by bolts, the top of the inversion mixing drum is a discharge port, and an inner cylinder is installed in the inside the overturning drive frame, and the width of the bottom of the inner tube is consistent with the width of the overturning mixing tube; a disassembly assembly is installed on the lower part of the overturning mixing tube; distributed between the inner wall of the overturning mixing tube and the outer wall of the inner tube.

There are six groups of cushioning and stabilizing components distributed in an equidistant ring; the three-dimensional motion mixer for pharmaceutical use of the utility model is equipped with a detachable inner cylinder, and the inner cylinder is installed and disassembled by disassembly components, which is convenient for disassembly and assembly, and is beneficial to It is very convenient to maintain and clean the inner cylinder without having to disassemble the overturning mixing cylinder, and greatly reduces the wear and tear on the overturning mixing cylinder caused by frequent disassembly and assembly, prolonging the service life of the device

Principle:

When it works, the Powder Mixer Machine is provided with three-dimensional movement, and carries out revolution and rotation. The mixer has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.

Features:

●The Powder Blending Machine is provided with three-dimensional movement so that the materials complete the process of mutual mixing from the agglomeration status to dispersion status under the actions of flowing, shearing, translational movement and dispersion, even mixing of materials is ensured and the evenness reaches 99.9%. In ordinary mixers, the materials only make simple dispersion and agglomeration movement in the vessel, which is featured by low efficiency and bad mixing quality.

●With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)

●The Powder Blender Machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.

●The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.

●For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.

●Stepless speed adjustment can be realized to facilitate material loading and unloading.

●It is featured by long service life and low noise.

●Vacuum feeding and lifting machine feeding are available.

Drawing: