Maintenance and Trouble Shooting of Powder Grinding Machine
1. Maintenance
Note: The Powder Milling Machine must be isolated before any maintenance can be started.
(1) During the operation, check the temperature of the bearing. If it is up to 60 C degree, stop the machine and check it.
(2) For the new Powder Mill Machine, the drive belt is easy to be elongated. So adjust the tightness of the belt
(3) Check and change the wearing parts
(4) Check the sieve before operation.
(5) The movable hammer and liner are abrasive parts. Check them if the finish powder is coarse.
(6) Use 2# white special grease on bearings of the main machine. The use term of bearing is 2000 hours. Fill 1/2 of the bearing chamber. Do not be too much.
2. Cleaning and routine maintenance by operator
Do the cleaning and routine maintenance after a period (every month normally, but it also depends on the use.) or change of the material.
The dismantling approaches:
2.1 Main machine
2.1.1 Open the door cover; take out the sieve frame; screw the nuts; take out the movable hammer; screw the bolts of liner and shell; take out the liner.
2.1.2 take out the belt cover; pull out the belt wheel; screw the nut of fan-device shell and machine shell; take out the fan-device cover; take out the fan wheel
2.1.3 Screw the connect nuts of the bearing stand and machine shell; take out the bearing stand. Then clear the grinding chamber.
2.2 Pulse dedusting system
If cleaning or changing the filter pockets, open the door of the deduster; screw the pockets along with the frame pipes; take out the filter pockets from the deduster along with the frame pipes.
2.3 Tubes Cleaning
Take down the fastening nuts at the joints and the air-lock device; clear all the tubes.
Note: connect the tubes and parts well and fasten them before operation.
January 25, 2024
January 15, 2024
February 19, 2024
January 14, 2024
July 28, 2023
January 25, 2024
Commissioning of the powder milling machine. a. After installation, check all the joining parts and the bolts. b. Start the motor, check if the machine runs smoothly without the abnormal noise. c....
If your material contents a lot of water, for example, 50% water, 60% water, then how to dry it? A hollow paddle dryer machine is a very good choice for this kind material. The hollow paddle drying...
Open type fluid bed dryer or airflow dryer are prone to explosion or burning hazards due to the contact of a large amount of air with flammable and explosive solvent gases when they are work,...
In the pharmaceutical and chemical fields, there are a large number of materials containing flammable and explosive solvent gases. Some materials contain a large amount of dust. In the past, vacuum...
Email to this supplier
January 25, 2024
January 15, 2024
February 19, 2024
January 14, 2024
July 28, 2023
January 25, 2024
Send Inquiry
Ms. Susan
Tel:86-0510-86184255
Fax:
Mobile Phone:+8615961650796
Email:susanliu35@gmail.com
Address:No.8 Dongmeng Road, Dongmeng Technology Zone, Nanzha Town, Jiangyin , Wuxi, Jiangsu
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
