Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Commissioning of the Powder Milling Machine.
a. After installation, check all the joining parts and the bolts.
b. Start the motor, check if the machine runs smoothly without the abnormal noise.
c. Check if the shafts rotate smoothly.
d. Run the machine without load for a while
e. If everything is OK, do the commissioning as the following steps:
(1) The order of start machine: Blower on--Impeller on---Discharge on-- Sieving 1---Sieving 2---Grinding on---Air hammer on.
(2) After starting the machine, the operator should pay attention to the instrument panel on the Control box, till the electricity is remain stable, then start feeding the raw material products. During the feeding, make sure the Amps do not exceed the milling motor’s rated Amps, other-wise, the feeding speed should be reduced.
(3) The order of stop machine: Grinding off--Blower off--Impeller off-- Discharge off-- Air Hammer off--Sieving 1--Sieving 2.
Operation of the Powder Mill Machine.
(1) The order of start machine: Blower on--Impeller on---Discharge on-- Sieving 1---Sieving 2---Grinding on---Air hammer on.
(2) After starting the Powder Grinding Machine, the operator should pay attention to the instrument panel on the Control box, till the electricity is remain stable, then start feeding the raw material products. During the feeding, make sure the Amps do not exceed the milling motor’s rated Amps, other-wise, the feeding speed should be reduced.
(3) he order of stop machine: Grinding off--Blower off--Impeller off-- Discharge off-- Air Hammer off--Sieving 1--Sieving 2.
(4) clean the pocket of the deduster regularly.
January 25, 2024
January 15, 2024
February 19, 2024
January 14, 2024
January 25, 2024
Maintenance and Trouble Shooting of Powder Grinding Machine 1. Maintenance Note: The powder milling machine must be isolated before any maintenance can be started. (1) During the operation, check the...
If your material contents a lot of water, for example, 50% water, 60% water, then how to dry it? A hollow paddle dryer machine is a very good choice for this kind material. The hollow paddle drying...
Open type fluid bed dryer or airflow dryer are prone to explosion or burning hazards due to the contact of a large amount of air with flammable and explosive solvent gases when they are work,...
In the pharmaceutical and chemical fields, there are a large number of materials containing flammable and explosive solvent gases. Some materials contain a large amount of dust. In the past, vacuum...
Email to this supplier
January 25, 2024
January 15, 2024
February 19, 2024
January 14, 2024
January 25, 2024
Send Inquiry
Ms. Susan
Tel:86-0510-86184255
Fax:
Mobile Phone:+8615961650796
Email:susanliu35@gmail.com
Address:No.8 Dongmeng Road, Dongmeng Technology Zone, Nanzha Town, Jiangyin , Wuxi, Jiangsu
Related Products List
Mobile Site
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.